9.9/10
Call us +31 (0)35 203 16 41
Powered by Experience
Huge product knowledge
High Quality Products
Premium brands
Best & Fastest Service
Worldwide shipping
Powered by dyno-chiptuningfiles.com

Autoflasher ToolAutoflasher Slave Tool

Gehäuse & Kabel (liegend, correct size) 001.3143
10 free credits included
Slave
€ 1.000,00 Excl. VAT
Product information

The Autoflasher tuning tool is the ideal tool to customize and optimize ECU software of thousands of vehicles via the OBD socket. Autoflasher also makes it possible to carry out more complex repair work via OBD, Bench, Bootloader, JTAG, AUD or BDM. With the cables we supplied, you can quickly and easily identify and fix communication and connection errors. You will find some key features below:

READ AND WRITE FUNCTION
Due to its high compatibility, our Autoflasher can be used to read out and write to all common engine and transmission control units.

BACK TO ORIGINAL
With this function, many control units can not only be reset to their original state, but you can also downgrade or upgrade the current data status.

CHECKSUM CALCULATION
You save yourself the manual calculation of the checksums. The Autoflasher tuning tool takes over this task for you and adapts the values if necessary.

ERROR GOODBYE
Our Autoflasher finds existing fault codes via the OBD-II socket and removes them automatically directly after writing the tuning file. You do not need to do this separately

OBD FLASH & ECU DETECTION
We are approaching the 30,000 protocol mark with great strides and new ones are added almost daily. With our tool, you work very effectively and don't lose any time. For even greater convenience, we have programmed our tool to recognize incorrectly selected control units and set the appropriate protocol without manual intervention.

BENCH FLASH
For some control units, additional removal of the control unit is necessary. We supply all the necessary contents in our Autoflasher case so that the ECU can be conveniently removed, whose connection sits on the pins on the connector. Thanks to modern technology, it has not been necessary to open the ECU for several years.

ECU & TCU CLONING
The Autoflasher can do more than just increase performance. The tool has a true full-backup method and allows for a complete re-learning process, taking support and ECU repair services to a whole new level.

BOOT FLASH
Occasionally, there are still ECUs where neither OBD nor the Bench method are used. These ECUs, which only make up a small fraction, can only be processed accordingly after opening the ECU. With the boot flash method, the connection is made on the circuit board.

In addition, The Autoflasher allows more complex repair work via OBD, Bench, Bootloader, JTAG, AUD, or BDM mode. With the included cables, you can also easily find communication and connection errors and solve them in record time.

THE AUTOFLASHER TOOL INCLUDES:

  • Autoflasher
  • BDM Cable
  • JTAG Cable
  • OBD Cable
  • USB cable
  • BENCH/BOOT cable
  • Power supply unit
  • USB flash drive

Service information

FREE DCF CREDITS!
Tuning-shop.com gives away 10 DCF tuning file credits when ordering a Slave tool which is linked to the Master tool of Dyno-ChiptuningFiles.com. These 10 Free credits are only available if the slave is linked to the Master tool of Dyno-ChiptuningFiles for at least one year. The Slave user must have purchased a minimum of 10 Slave Credits from dyno-chiptuning-files.com during the year.

TRANSFER
Slave transfer incurs cost and requires an approval from the current Master, possibly a mandatory update of the subscription (if the subscription is not active any more). The Slave user must have purchased a minimum of 10 Slave Credits from dyno-chiptuning-files.com before a transfer.

SUBSCRIPTIONS
This tool utilizes an annual subscription to provide updates and automatic functionality. When purchasing this tool, one year of activation is included. Afterwards, the annual fee depends on the version: Master or Slave. The prices can be found on the subscription page of this tool.

More Autoflasher

Manufacturer product number

AF001

Autoflasher ToolAutoflasher Slave Tool

€ 1.000,00 Excl. VAT
Available Protocols:
The protocols below are also available as standalone purchase.
Your slave system is connected to Dyno-ChiptuningFiles.com Change master
Your order
Autoflasher Tool Autoflasher Slave Tool € 1.000,00
Selected protocols € 0,00
€ 1.000,00

Client reviews

There are no reviews yet for this product.

Write your own review
Back to the overview |

Autoflasher Slave Tool