9.9/10
Call us +31 (0)35 203 16 41
Powered by Experience
Huge product knowledge
High Quality Products
Premium brands
Best & Fastest Service
Worldwide shipping
Powered by dyno-chiptuningfiles.com

News

Alientech news update: Upgrade 1.87

Alientech news update: Upgrade 1.87
22 February 2024

Increase your workshop's earning potential in the heavy-duty vehicle field with a comprehensive cloning service on Bosch DCU15C167 installed on Yut...

Read more

Magic Motorsport news update: Flex 6.50.0.0

Magic Motorsport news update: Flex 6.50.0.0
20 February 2024

Connect your Flex to the ECU connector to access the whole content of Internal Flash and Internal EEPROM memories, then start working: you will opt...

Read more

Alientech news update: Upgrade 1.86

Alientech news update: Upgrade 1.86
14 February 2024

Intervene on Magneti Marelli MM10JA and IAW 11GF ECUs thanks to two new protocols now available on KESS3. Increase performance and reduce fuel cons...

Read more

Alientech news update: Upgrade 1.85

Alientech news update: Upgrade 1.85
8 February 2024

Renew your customer base thanks to KESS3 and TCU reprogramming within your workshop. Thanks to this new development, you can work on transmissions...

Read more

Alientech news update: 1.84

Alientech news update: 1.84
1 February 2024

Thanks to KESS3, you can now work quickly and effectively on the Valeo V56 ECUs equipped on turbo-petrol engines 1.2 Pure-Tech and 1.0 VTi of some...

Read more

Alientech news update: Upgrade 1.83

Alientech news update: Upgrade 1.83
24 January 2024

A great opportunity is now available for your workshop: work quickly and effectively on the latest giants branded Iveco.

Read more

Magic Motorsport news update: Flex 6.48.0.0

Magic Motorsport news update: Flex 6.48.0.0
23 January 2024

Thanks to the direct connection to the diagnostic port, you will no longer need to bother removing the ECU from the vehicle: just connect the OBD c...

Read more

Alientech news update: Upgrade 1.82

Alientech news update: Upgrade 1.82
18 January 2024

Work on Suzuki Baleno, Swift, SX-4, and Vitara, thanks to the new Virtual Reading protocol for KESS3. Expand your workshop's business opportunities...

Read more

Magic Motorsport news update: Flex 6.47.0.0

Magic Motorsport news update: Flex 6.47.0.0
9 January 2024

With this new solution, you will be able to identify the software version of the ECU in just a few seconds and download the virtual read to access...

Read more

Alientech news update: Upgrade 1.81

Alientech news update: Upgrade 1.81
21 December 2023

Work with BENCH and BOOT modes to meet the demands of your customers for compact Bobcat S76 with Bosch EDC17C87 ECU and off-highway JCB Backhoe Loa...

Read more

Magic Motorsport news update: Flex 6.46.0.0

Magic Motorsport news update: Flex 6.46.0.0
19 December 2023

New exclusive solution released, completely free of charge, allowing you not only to read and write the map area but also to access the EEPROM memo...

Read more

Alientech news update: Upgrade 1.80

Alientech news update: Upgrade 1.80
14 December 2023

Boost your job opportunities with this new development dedicated to VAG group brands and ECUs like Bosch EDC15VM+, Continental SDI9, Continental SI...

Read more

Magic Motorsport news update: Flex 6.45.0.0

Magic Motorsport news update: Flex 6.45.0.0
13 December 2023

A new protocol to program ZF 8G Tronic VGS3-FDCT automatic transmissions (TCUs) installed on Mercedes vehicles has been released.

Read more

Alientech news update: Upgrade 1.79

Alientech news update: Upgrade 1.79
7 December 2023

Engage in "BOOT" mode on Hyundai and Kia vehicles powered with 1.6 GDI and 2.0 MPI gasoline engines, directly connecting to the memories of Contine...

Read more

Alientech news update: Upgrade 1.78

Alientech news update: Upgrade 1.78
30 November 2023

Thanks to the two new protocols available for KESS3, you can work with great efficiency on the Bosch MG1UA008 and Bosch MG1US008 ECUs that manage s...

Read more

Alientech news update: Upgrade 1.77

Alientech news update: Upgrade 1.77
22 November 2023

Thanks to this new development, you can work on the MG1CS036 ECU installed on powerful Ford EcoBoost and Ti-VCT engines found in models such as F-1...

Read more

Alientech news update: 1.76

Alientech news update: 1.76
15 November 2023

Discover all the secrets of the electronic management of Bosch MD1CS016 control units installed in some Dacia, Nissan, and Renault models powered b...

Read more

Magic Motorsport news update: Flex 6.43.0.0

Magic Motorsport news update: Flex 6.43.0.0
14 November 2023

From now on, you will be able to access Internal Flash and Internal EEPROM memories in Bench mode, to optimize engine maps or remove DTCs from Ford...

Read more

Alientech news update: Upgrade 1.75

Alientech news update: Upgrade 1.75
9 November 2023

Reprogram via OBD the Phoenix L40 ECU equipped on 7 Series, 8 Series and 9 Series models of the John Deere brand. Enhance performance, repair and r...

Read more

Alientech news update: Upgrade 1.74

Alientech news update: Upgrade 1.74
1 November 2023

With four new protocols for KESS3, you can now access and modify the supported models like Honda City, Hyundai Genesis (for transmission), Hyundai...

Read more

Magic Motorsport news update: Flex 6.42.0.0

Magic Motorsport news update: Flex 6.42.0.0
30 October 2023

The new Flex update (vers. 6.42.0.0) is out now, allowing you to read Internal Flash and External EEPROM memories, download the virtual read of our...

Read more

Alientech news update: 1.73

Alientech news update: 1.73
26 October 2023

Work without risks on the Mitsubishi ECUs 21175-1591/1369 and 21175-0131, equipped in the latest small Kawasaki models like Z-125 and Ninja 125, as...

Read more

Magic Motorsport news update: Flex 6.41.0.0

Magic Motorsport news update: Flex 6.41.0.0
23 October 2023

OBD protocol to program Hitachi BED 501 ECUs is out: a new update of Flex has been released, allowing to optimize engine parameters of Renault and ...

Read more

Alientech news update: Upgrade 1.72

Alientech news update: Upgrade 1.72
19 October 2023

Thanks to this new OBD protocol, you can now quickly cater to the needs of your clients who work with these types of vehicles. Take the best from K...

Read more

Magic Motorsport news update: Flex 6.40.0.0

Magic Motorsport news update: Flex 6.40.0.0
17 October 2023

New solution released to unlock in OBD Bosch MG1CS001, MG1CS011, and MG1CS111 ECUs. Enhance the performances of VAG vehicles with 1.0L, 1.5L and 2....

Read more

Alientech news update: 1.71

Alientech news update: 1.71
11 October 2023

Work faster and with complete reliability via OBD on dozens KTM models with Keihin 79641031000 ECU and 4-stroke engines, including EXC, SX, XC, Fre...

Read more

Magic Motorsport news update: Flex 6.38.0.0

Magic Motorsport news update: Flex 6.38.0.0
2 October 2023

Enhance your VAG group vehicle performances equipped with Diesel engines. With the latest Flex release (ver. 6.38.0.0), you can now program Bosch M...

Read more

Alientech news update: Upgrade 1.69

Alientech news update: Upgrade 1.69
27 September 2023

Ensure complete reliability on the Mitsubishi MH8115F ECU that are equipped on Kawasaki's Ninja ZX-10R and H2 models. Read directly from the ECU co...

Read more

Magic Motorsport news update: Flex 6.37.0.0

Magic Motorsport news update: Flex 6.37.0.0
25 September 2023

A new protocol adds up to Flex's vehicle list: from today on, you can work on Hitachi BED 434 ECUs in OBD mode.

Read more

Alientech news update: Upgrade 1.68

Alientech news update: Upgrade 1.68
20 September 2023

Thanks to two new protocols dedicated to TCU reprogramming, you can now remap GM automatic transmissions with Bosch TCUs 6T70, 6T75, 6T80, and 6L45...

Read more
1 2 3 Next

Home > About us > News