9.9/10
Call us +31 (0)35 203 16 41
Powered by Experience
Huge product knowledge
High Quality Products
Premium brands
Best & Fastest Service
Worldwide shipping
Powered by dyno-chiptuningfiles.com

AlientechKESS3 Slave Version promotion

KESS3_OBD_Bench_Boot_programming_SuiteCase_Opened - kopie
Agriculture + Truck Protocol promotion!
Slave
€ 2.980,00
€ 1.990,00 Excl. VAT
Product information

KESS3 SLAVE: OBD, Bench and Boot programming

KESS3 is the powerful tool that allows the READING and WRITING of the ECU found in Automobiles, motorcycles, trucks, agricultural vehicles and marine applications by simply connecting the supplied interface cable to the diagnostic port of the vehicle.

Thanks to thirty years of experience and nearly three years of development, KESS3 is the most advanced engineering achievement ever conceived in the chiptuning industry. Alientech has made a significant breakthrough to create something unique and extraordinary, which has no equal in the market, in terms of functions, convenience, and versatility.

KESS3 has been developed to provide everyone, from the young engine enthusiast to the most specialized mechatronic technicians with a quick and simple interface to any engine control unit and automatic gearbox on the market.

Sensational performance, high operational flexibility and ease of use allow you to interface with engines and gearbox control units with a single tool. KESS3 combines 3 operating modes in one tool. OBD, Bench and Boot mode. Operating modes OBD and Bench / Boot must be bought separately!

OBD - With the OBD mode, you can easily access all the ECU data through the diagnostic socket.
BENCH - A simple interface to the connector and you have complete access to the data of your ECU.
BOOT - This mode allows you to access all system data areas. Read and write.

Every aspect of the KESS3 tuning tool is carefully designed to achieve optimal performance, operational flexibility, and ease of use. Its renewed architecture exploits the full potential of each component. A new microprocessor, latest generation I/O interfaces, new built-in sensors and high-performance EEPROM and FLASH memories are the main features of KESS3 tuning tool.

THE CPU
The KESS3 uses the most powerful microprocessor on the market. 7 times more powerful than the previous generation. Pure power that can execute your commands reliably, faster and more efficient.

LINES OF COMMUNICATION
KESS3 automatically and instantly recognizes the right communication line, to work faster, using only an OBD cable. Ethernet, FlexRay, CAN Bus, K-Line, L-line, J1850, J1708. All the essential lines to start any operation inside the vehicle in total safety.

PROJECTED TOWARDS THE FUTURE
GPS, Accelerometer, Bluetooth, and Wi-Fi. All embedded in one platform. The combination of these features and the constant technological developments that distinguish us will allow us to develop many new functions in the future.

PERFORMANCE
The renewed USB Full speed chip allows an up to 10 times increase in the performance of importing and exporting files to and from the KESS3 tool. But not only that, Alientech added a new web infrastructure to the KESS3 tuning tool. The result being, an Alientech cloud with improved speed and performance.

SUBSCRIPTIONS
The KESS3 tuning tool utilizes an annual subscription to provide updates and automatic functionalities. When purchasing this tool, one year of activation is included. Afterwards, the annual fee depends on the version of the tool. The prices can be found on the subscription page of the KESS3 tool.

KESS3 CASE INCLUDES:

  • USB cable, needed to interface with the KESS3 instrument through the PC.
  • The new generation OBD cable that integrates all the communication lines used by the various car manufacturers; this cable, therefore, replaces various wirings that were used by KESSv2; more specifically, it is also able to communicate with Honda, Volvo, Lotus and Toyota.
  • 1400SWALIM power supply, capable of providing sufficient current and voltage to communicate with the electronic control units, in a stable and safe way.
  • 144300TALI cable, to power the instrument using a bench power supply (the power supply, on the other hand, is sold separately).
  • 144300KBNC cable to communicate with the control units directly on the bench.
  • 144300KTER pack which contains all the cables useful for connection in BENCH or BOOT mode. (extender).
  • 144300T104 rainbow cable IDC 26-10 consisting of 10 wires, used to connect directly to the electronic board of the control unit.
  • 144300T105 rainbow cable IDC 26-16 composed of 16 wires, used to connect directly to the electronic board of the control unit.
  • 144300T106 rainbow cable IDC 26-26 consisting of 26 wires, used to connect directly to the electronic board of the control unit.

Car-LCV protocol Promotion

This product contains the Agriculture-Truck + Agriculture-Truck BOOT/Bench activation!

Service information

FREE DCF CREDITS!
Tuning-shop.com gives away 10 DCF tuning file credits when ordering a Slave tool which is linked to the Master tool of Dyno-ChiptuningFiles.com. These 10 Free credits are only available if the slave is linked to the Master tool of Dyno-ChiptuningFiles for at least one year. 

TRANSFER
Slave transfer incurs cost and requires an approval from the current Master, possibly a mandatory update of the subscription (if the subscription is not active any more). The Slave user must have purchased a minimum of 10 Slave Credits from Dyno-ChiptuningFiles.com before a transfer.

More Alientech

Manufacturer product number

KESS3HW000

AlientechKESS3 Slave Version promotion

€ 2.980,00
€ 1.990,00 Excl. VAT
Your slave system is connected to Dyno-ChiptuningFiles.com Change master

Client reviews

There are no reviews yet for this product.

Write your own review
Back to the overview |

KESS3 Slave Version promotion