OBD Full and Bench solution for Continental ACM2.1 and ACM2.2

Flex version 6.28.0.0 out now

From now on you can program AdBlue Continental ACM2.1 and ACM2.2 ECUs in OBD Full and Bench without the need to open the unit.

New Flex update for Mercedes trucks and buses.

No patch is used for programming with these new protocols, thus ensuring your vehicle’s warranty to remain valid. You just need to write the original full backup of ECUs to bring them back to their original state.

New ECUs added to Flex vehicle list:

• ACM2.1 D1 
• ACM2.1 D2
• ACM2.1 D3
• ACM2.1 D3 (protected with password) 
• ACM2.1 D4
• ACM2.2 D2

Some of the supported vehicles:

• Mercedes Truck Actros 1851 12.8L OM471LA 510HP
• Mercedes Truck Arocs 1843 10.7L OM470 428HP
• Mercedes Truck Antos 2532 7.7L OM936 315HP
• Mercedes Bus Citaro C2 10.7L OM470 394HP
• Mercedes Bus Tourismo RHD 12.8L OM471LA 428HP
• Setra S515 HDH 12.8L OM471LA 470HP
• Freightliner Cascadia DD15 14.8L Detroit DD15 530HP

The new protocol is available for the following software packages:
OBD Full

• FLS0.1M – SW Flex ECU (car, van, bike) OBD/Bench Master
• FLS0.1S – SW Flex ECU (car, van, bike) OBD/Bench Slave
• FLS0.5M – Flex Full SW Package Master
• FLS0.5S – Flex Full SW Package Slave

To program ACM2.1 and ACM2.2 in OBD Full you need to purchase the FLX2.65 cable on www.magicmotorsport.shop or via ticket

Bench

• FLS0.1M – SW Flex ECU (car, van, bike) OBD/Bench Master
• FLS0.1S – SW Flex ECU (car, van, bike) OBD/Bench Slave
• FLS0.5M – Flex Full SW Package Master
• FLS0.5S – Flex Full SW Package Slave
• FLS0.10M – SW Flex Boot Infineon TC17xx / TC2xx Master
• FLS0.10S – SW Flex Boot Infineon TC17xx / TC2xx Slave

Newly added protocols:
(OBD Full)

• Mercedes Trucks/Bus Continental ACM2.1 D1 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.1 D2 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.1 D3 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.1 D3 (PW protected) TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.1 D4 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.2 D2 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup

Read time: ~ 1.30 minutes  Write time: ~ 2 minutes

(Bench)

• Mercedes Trucks/Bus Continental ACM2.1 D1 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.1 D2 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.1 D3 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.1 D3 (PW protected) TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.1 D4 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
• Mercedes Trucks/Bus Continental ACM2.2 D2 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup

Read time: ~ 1.30 minutes  Write time: ~ 2 minutes

Bug fixes:

• Fixed connection error with some versions of VAG Simos10.xx
• Add new HW version supported of Marelli 11GF
• Support added for new kind of checksum on Continental MCM and ACM
• Fixed CRC calculation on Marelli10JA

Software improvements:

• Added support for Melco E6T8008x MH8115
• Add support for Subaru Denso 112800 SH72531
• Updated protocol ACM2.1 (3520002) from Bench to Boot, in order to support also ACM2.1 D3 (PW protected) and D4