The CMDFlash tool is a reader/programmer supporting BDM, EOBD K-LINE, EOBD CAN-BUS, EOBD PWM for all the new generation ECUs. With BDM you need to unplug the ECU from the vehicle, open and connect it to our tool using a connector available on every Bosch EDC16, Marelli, Siemens and Delphi ECUs.
This tool can be sold as a plug-in of our Map3d software or stand-alone tool.
The Software allows you to read/write the Eprom (29bl802 / M58), the internal firmware and the serial e2prom containing the car's codes. Checksum correction algoritm is automatic for all the ECU families, this mean you don't have to care about checksums calculations.

With this tool it is possible to read all the ecu's eprom, and after a bad map tuning, a system hung or an interrupted write operation it is always possible to restart the program operation to restore the ECU and start the car.
All the ECU data can be stored in a single file with additional info like brand, model, plague, chassis number, data, note, customer etc. With search facilities and information directly integrated in Microsoft Windows Explorer.

CMDFlash Master Full includes:

• OBD KLine, CANBUS, DoiP ENET
• VAG FRF/ODX/SGO flasher
• BOOT/Bench Interface for all supported processors ST10,C167,RENESAS,TRICORE,TC29x,MPC5777.
• BDM - MPC5xx
• Read and write unencrypted files
• All accessories included for OBD, boot and bench
• High current Power supply suitable for BOOT - Bench and BDM
• Enet Cable
• SGW Adapter FCA group
• One year free subscription ( value 1100CHF)

*MPC55xx BDM, positionig frames with adapters and Industrial Vehicles are not included

CMD10.00.05