Work on dozens of newly supported control units with the new Upgrade-Pack: remap and repair several ECUs and DCUs equipped on cars and LCVs across Asia and Europe

Operate in all connection modes with 18 new protocols dedicated to the automotive world. This is one of the largest releases for KESS3: now expand your workshop’s intervention capabilities.

Remap Hyundai/Kia ECUs with KESS3 and Powergate – Continental-Siemens SIM2K-25x.
Welcome the latest Hyundai and Kia vehicles into your workshop with the new protocol for the Continental-Siemens SIM2K-25x engine control unit. With this development, you can read and write the ECU via OBD on several iconic models, including the irresistible i30N. But that’s not all: with the same technological advantage, you can work on improving performance or reducing fuel consumption on the most common 1.6, 2.0, and 2.4 GDI engines that complete the Korean group’s vehicle range.

Protocols for every operational need.
The new Upgrade-Pack expands your intervention possibilities on dozens of other ECUs and DCUs. Indeed, it allows you to operate with the practicality and effectiveness of KESS3 on Delphi DCM2.7AP, enabling you to read and write engine parameters directly from the OBD socket.

The wide range of developments also includes 13 protocols for Bosch, Marelli, Delphi, Denso and Sagem ECUs. Work on these ECUs on bench to delve into the core of engine electronics, even unlocking the ability to clone the control units, in certain cases. Specifically, you can work on Bosch ME17.5.22 and Bosch EDC17CP20 ECUs from the VAG group or Marelli 9DF HW001/HW002 FCA ECUs, in “BENCH” mode, also allowing cloning operations.

Last but not least, KESS3 has developed an exclusive world-first protocol to intervene in “BENCH mode” on Bosch RBA1DGS1 DCUs for the Isuzu D-Max. The intervention on DCUs extends to Bosch DCU17PC43 and Lucas DCU3F for reprogramming and cloning. Whatever your needs may be, KESS3 is ready to contribute, ensuring your customers’ complete satisfaction.

With KESS3 and Powergate, you offer a winning combination: provide your workshop customers with top-notch service.

ECU - OBD

• Continental-Siemens SIM2K-25x
• Delphi DCM2.7AP

ECU - BENCH/BOOT

• Bosch MEG17.9.22
• Bosch ME17.5.22
• Bosch EDC17CP20
• Bosch EDC15P+
• Marelli IAW5AF
• Marelli 9DF HW001
• Marelli 9DF HW002
• Delphi CRD3.11
• Denso 6DE1 V6
• Marelli IAW10GM
• Mitsubishi E6T39xxx
• Sagem S2000PM2
• Sagem S2000PL4FC5
• Sagem S2PM

DCU - BENCH/BOOT

• Bosch RBA1DGS1
• Bosch DCU17PC43
• Lucas DCU3F

This development spans several vehicles, covering multiple market niches, each with specific needs. With KESS3, you can work efficiently, expanding your customer base and offering a wide range of programming services, from tuning to repair, to fuel consumption reduction. But that’s not all: step beyond your workshop walls with Powergate and bring your tuning ideas worldwide.

Continental-Siemens SIM2K-25x

HYUNDAI
RD, WR in OBD

KIA
RD, WR in OBD

Delphi DCM2.7AP

MAHINDRA
RD, WR in OBD

Bosch MEG17.9.22

HYUNDAI
RD, WR and Clone in Bench Mode

Bosch ME17.5.22

SEAT
RD, WR and Clone in Bench Mode

SKODA
RD, WR and Clone in Bench Mode

VOLKSWAGEN
RD, WR and Clone in Bench Mode

Bosch EDC17CP20

HAKO
RD, WR and Clone in Bench Mode

Bosch EDC15P+

AUDI
RD, WR and Clone in Bench Mode

SEAT
RD, WR and Clone in Bench Mode

SKODA
RD, WR and Clone in Bench Mode

VOLKSWAGEN
RD, WR and Clone in Bench Mode

Marelli IAW5AF

FIAT
RD, WR and Clone in Boot Mode

LANCIA
RD, WR and Clone in Boot Mode

Marelli 9DF HW001/HW002

ALFA ROMEO
RD, WR in Bench Mode

FIAT
RD, WR in Bench Mode

LANCIA
RD, WR in Bench Mode

Delphi CRD3.11

MERCEDES-BENZ
RD, WR in Bench Mode

Denso 6DE1 V6

OPEL
RD, WR and Clone in Bench Mode

Marelli IAW 10GM

MITSUBISHI
RD, WR and Clone in Boot Mode

Mitsubishi E6T39xxx

MITSUBISHI
RD, WR in Bench Mode

Sagem S2000PM2

CITROEN
RD, WR in Boot Mode

Sagem S2000PL4FC5

PEUGEOT
RD, WR in Boot Mode

Sagem S2PM

PEUGEOT
RD, WR in Boot Mode

Bosch RBA1DGS1

ISUZU
RD, WR in Bench Mode

Bosch DCU17PC43

ISUZU
RD, WR and Clone in Bench Mode

Lucas DCU3F

SUZUKI
RD, WR and Clone in Boot Mode

Choose KESS3, the unique tool that simplifies your daily work. Reprogram vehicles, monitor their status with DTC reading and reset, and finally, test performance with DynoDrive.

Don’t wait any longer: activate the CAR – OBD and BENCH/BOOT protocols, and with an active subscription, you can work on all the newly supported ECUs and DCUs, as well as access the latest features.

Control unit repair

You do more than just tuning in your workshop with KESS3!

Working in this sector allows you to meet parallel needs of your customers while increasing your profit opportunities. One of these formulas is ECU repair.

Thanks to the BENCH and BOOT mode of KESS3, it is possible, where available, to clone not only the memories of the ECU but also the whole management firmware to obtain a new control unit.

Design and performances, just a click!

Alientech Suite is your right arm in the calibration field.

Looks and functionality are designed to give you maximum responsiveness, providing a practical and intuitive working experience: everything you need is available in your hands.

Powergate

Powergate is the new generation of portable control unit programmer for cars and motorcycles, designed to offer every driver a personalized driving experience of their vehicle.

Thanks to a compact design and connection with an intuitive app, Powergate provides a highly customizable and precise vehicle tuning experience.

ECM Titanium Spotlight: Hyundai i30N: the Korean hot hatch that sets enthusiasts’ hearts racing

The Hyundai i30N is the perfect expression of sportiness and performance, designed for those seeking adrenaline and driving precision. Born from Hyundai’s N division’s expertise, it combines advanced technologies and an aggressive design to deliver thrilling performance on the road, as well as on the track.

Since its debut, it has immediately captured the attention of tuning enthusiasts and sports car lovers, thanks to its technical features like the 2-liter turbo with 275 hp, impeccable traction (guaranteed by a limited-slip differential), and its dynamic lines. Every detail of the i30 N is designed to offer a pure driving experience. This is evidenced by its multiple victories in various motorsport championships and the positive feedback from owners, confirming its potential and making it one of the most appreciated and customized hot hatches in its category.

With official Alientech equipment, all Hyundai/Kia vehicles covered by this Upgrade-Pack can enjoy a new lease on life in just a few simple steps, ensuring your profit and the satisfaction of your clients’ requests.

i30 N and Powergate: the perfect combination

Powergate is the ideal tool to transform a C-segment sports car like the i30 N into a vehicle with multiple personalities. With 4 available configurations, you can manage various calibrations, each suited to a different type of use. Long journey, daily commute, or track day? Your customer can choose, with just a tap on their smartphone, the driving experience they desire at any moment.

For you, Powergate represents an added value. Thanks to its “connected” nature, it allows you to manage calibrations remotely, increasing your customer base and expanding your reputation beyond local boundaries. This tool, a coveted object for tuning enthusiasts, can become a real springboard for your business, creating new profit opportunities and boosting your visibility in the tuning world.

ECM Titanium: your partner for calibrations

In addition to enhancing the performance of a sports icon like the Hyundai i30 N, this development expands intervention possibilities on 18 other ECUs and DCUs. With ECM Titanium, you can work on each with maximum precision and reliability. The ability to modify engine parameters by choosing your preferred display mode allows you to perform interventions flexibly, providing your customers with a tailored service.

It’s not just about improving performance but executing various types of work, such as specific operations on DCUs. With the necessary expertise, these interventions allow you to enhance the overall efficiency of the engine, optimizing its everyday use while maintaining reliability at any engine speed.