Magic MotorsportKorhex for FLEX - Advanced MCU Access & Boot Glitch
Korhex is the new hardware extension for the Magic motorsport FLEX, developed for direct MCU access during supported ECU unlocking and Boot Glitch procedures. Instead of desoldering resistors, manually connecting Boot pins, or unnecessarily turning over the ECU PCB, simply position Korhex on the designated microcontroller contact point using the appropriate mask and follow the guided procedure in FLEX.
The result is a faster and more streamlined workflow with less manual preparation and a reduced risk of damaging the ECU.
Korhex expands the capabilities of FLEX for modern and protected ECUs that require advanced MCU access.
Key benefits:
- Direct MCU access on supported ECUs
- Specifically developed for FLEX Boot Glitch procedures
- No resistor desoldering required for supported procedures
- No manual Boot pin connection
- Reduced ECU PCB handling
- Fully integrated workflow within FLEX
- Suitable for ECU unlocking and programming
- Support continuously expanded through future FLEX updates
- Prepare the ECU according to the instructions provided in the FLEX software.
- Then position Korhex on the indicated MCU contact point using the correct dedicated mask.
- Korhex works together with FLEX to perform the required access or unlocking procedure. Once access to the ECU has been obtained, you can continue directly with the standard programming procedure in FLEX.
- Everything remains within the same FLEX environment, software and workflow.
Depending on the ECU and protocol, Korhex can support functions such as:
- Read/ write Internal Flash
- Read/ write Internal EEPROM
- Full Backup
- Boot Unlock
Working mode: Boot Glitch
Software: Magicmotorsport FLEX
Korhex can be used with:
- FLEX Full Master – FLS0.5M
- FLEX Full Slave – FLS0.5S
- FLEX Boot Glitch Master – FLS0.20M
- FLEX Boot Glitch Slave – FLS0.20S
Already using FLEX Full Master or FLEX Full Slave with an active subscription? In that case, you only need the Korhex hardware. If you do not have a FLEX Full configuration, Korhex can be combined with the separate FLEX Boot Glitch FLS0.20M/S software package.
Korhex Pricing
€ 1,990 For FLEX Full Master and Flex Full Slave users with an active subscription.
€ 2,190 For FLEX users with a partial software configuration.
For users without the required FLEX Full configuration, the appropriate FLEX Boot Glitch software package may also be required.
Flex Boot Glitch Software
For users without FLEX Full, the new Boot Glitch software package is available separately:
FLS0.20M – FLEX Boot Glitch Master: €900
FLS0.20S – FLEX Boot Glitch Slave: €900
Already using multiple FLEX software packages? Contact us before ordering. In some cases, upgrading to FLEX Full may offer better value than purchasing the Boot Glitch package separately.
Kundenbewertungen
Es gibt noch keine Bewertungen für dieses Produkt.
Schreiben Sie Ihre eigene Bewertung