CMD FlashtecCMD tool - Slave unrestricted

Description:

The CMDFlash unrestricted Slave tool is a reader/ programmer, supporting; BDM, EOBD K-LINE, EOBD CAN-BUS and EOBD PWM for all new generation ECUs. With BDM you need to unplug the ECU from the vehicle, open and connect it to the tool, using a connector available on every Bosch EDC16, Marelli, Siemens and Delphi ECU.

This tool can be sold as a plug-in of our Map3d software or as stand-alone tool.
The software allows its user to read and write the EPROM (29bl802/ M58), the internal firmware, and the serial e2prom containing the vehicles' codes. Checksum correction algorithm is automatic for all the ECU families, this means you do not have to care about checksum calculations.

With this tool it is possible to read all ECUs EPROM, after a bad map tuning, a system hung or an interrupted writing operation it is always possible to restart the program operation to restore the ECU and start the vehicle. All ECU data can be stored in a single file with additional info such as brand, model, plague, chassis number, data, note, customer, etc. With search facilities and information directly integrated in Microsoft Windows.