CMD FlashtecCMD tool - Full Slave

Description:

The CMDFlash Full Slave tuning tool is a reader/ programmer tool, supporting; BDM, EOBD K-LINE, EOBD CAN-BUS and EOBD PWM for all new generation ECUs. With BDM you need to unplug the ECU from the vehicle, open and connect it to the Flash tool using a connector available on every Bosch EDC16, Marelli, Siemens and Delphi ECU.

This tool can be sold as a plug-in of our Map3d software or as stand-alone tool. The software allows you to read/ write the EPROM (29bl802/ M58), the internal firmware and the serial e2prom containing the vehicles' codes. Checksum correction algorithm is automatic for all the ECU families, this mean you do not have to care about checksums calculations.

With this tool it is possible to read all the ECUs EPROM, and after a bad map tuning, a system hung, or an interrupted write operation, it is always possible to restart the program operation to restore the ECU and start the vehicle. All the ECU data can be stored in a single file with additional info like brand, model, plague, chassis number, data, note, customer, etc. With search facilities and information directly integrated in Microsoft Windows.